Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Virginia Beach Homeowners
An electric gate that stops responding turns a driveway into a locked door. Whether the operator clicks and does nothing, the gate drifts back open halfway through a cycle, or the keypad has gone dark, our gate-only technicians diagnose the fault on-site and tell you plainly what it will take to fix it. Our technicians have up to 14 years of experience, and we work on the gate you have, not the one we prefer to sell. We service LiftMaster, FAAC, BFT, Mighty Mule and other major systems, so there’s no brand switch needed to get you running. Electric gate repair in Virginia Beach is what we do every working day, with same-day service available and a price quoted and agreed before any work starts. Call (844) 834-3028 to book. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Gate Opener Repair
Gate Opener Repair fixes the part that actually moves your gate: the operator housing, its control board, the limit settings and the drive that pushes the leaf along its track or arm. You need it when the gate opens partway and reverses, when the remote only works from a few feet away, or when the motor sounds labored and then gives up. Our technicians test the operator against the gate’s actual weight and travel rather than guessing, because a tired motor and a binding hinge can produce the same symptom. A typical gate opener repair in Virginia Beach runs $180 to $520 depending on whether we’re replacing a control board, a receiver, a limit switch or the drive assembly, and the written estimate sets the final price.
Control Board and Receiver Failures
Boards die from power surges, water intrusion and simple age, and the symptom is often a gate that behaves randomly rather than not at all. We identify the fault at the board instead of replacing it by default, and we test the receiver separately so a bad remote isn’t mistaken for a dead operator. Expect a clear explanation of what failed and why.
Limit Switches and Travel Settings
Limits tell the operator where the gate should stop, and when they drift the gate either slams or reverses short of the post. We reset and re-test travel on the full cycle, then confirm the safety devices still trip correctly before we leave. Small adjustment, real difference in how the gate feels to operate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair
Automatic Gate Repair covers the whole automated system: the operator, the sensors, the wiring and the safety edges that keep the gate from closing on a car or a person. You need it when the gate stops mid-cycle, when the safety beam is obstructed and nobody knows why, or when a vehicle loop stops detecting traffic. We treat the automation as one system, which matters because a gate that “won’t open” is often a sensor fault and not a motor fault at all. Our technicians carry the diagnostic gear to follow the signal from the keypad or remote all the way to the operator, so the fault gets found rather than swapped out at your expense. Typical automatic gate repair in Virginia Beach runs $150 to $450 for sensor, wiring and safety device work, with a written estimate confirming the number before we start.
Safety Sensor and Loop Faults
Photoelectric beams and in-ground loops fail for unglamorous reasons: misalignment, moisture in a splice, a damaged coil. We test each one independently so a single bad connection doesn’t get priced as a full operator replacement. The gate should stop and reverse on command, and we verify that before we call the job done.
Manual Release and Backup Operation
Every automatic gate should have a working manual release for when the power drops or the operator fails. We check the release under load, because one that won’t budge is worse than useless in a moment you actually need it. If you’ve never tested yours, that’s a good reason to have us look.
Electric Gate Motor
Electric Gate Motor problems show up as a gate that moves sluggishly, overheats, or grinds through its cycle and then quits. The motor is the workhorse of the system, and when it’s failing the signs build gradually: slower travel, a hot housing, a straining hum before the gate finally stops. We test the motor under real load and check the gearbox and drive alongside it, because a motor that seems weak is sometimes fighting a gate that needs adjustment. Diagnosis and repair of the motor and its drive on Mighty Mule, LiftMaster and BFT operators typically runs $220 to $650 in Virginia Beach, and where replacement is the honest answer we’ll say so plainly instead of rebuilding a unit that’s past it. The free estimate sets the scope and the price before any work begins.
Overheating and Duty Cycle Limits
Residential operators are built for a set amount of work per hour, and a gate that cycles far more than that will overheat no matter how good the motor is. We check the duty cycle against how the gate is actually used, since a busy shared driveway can outrun a residential operator. If the duty is the problem, we tell you that rather than selling you a motor that will fail the same way.
Gearbox and Drive Wear
Gears wear, and the first sign is often a grinding noise or a gate that hesitates at the same point every time. We inspect the drive for wear and confirm the gate itself moves freely, because a binding gate will eat a healthy motor. Catching drive wear early is what keeps a small repair from becoming a motor replacement.
Gate Access Control
Gate Access Control is the layer that decides who gets in: keypads, card readers, remotes, intercoms and the telephone entry systems that manage a shared property. You need it addressed when codes stop working, when a keypad loses power, or when a property manager can’t add or remove users reliably. We service access hardware on residential and commercial systems alike, and we test the full chain, from the credential at the keypad to the relay at the operator, because a “dead keypad” is often a wiring fault further back. Access control work in Virginia Beach usually runs $175 to $600 depending on whether it’s a keypad swap, a receiver replacement or rewiring an entry system, with the price confirmed in writing before we touch it.
Keypads and Entry Systems
Keypads fail from moisture, worn buttons and lost programming, and DoorKing and Linear entry systems each have their own quirks. We program and re-test credentials after the repair so residents actually get back in. You’ll get a short explanation of what was replaced and how the new entry works.
Relay and Wiring Faults
The relay that tells the operator to open is a small part that stops everything when it fails. We trace the circuit from the credential reader through to the operator terminal, so the fix lands on the actual fault. A reliable entry system is mostly good connections and clean programming.
Commercial Gate Operator
Commercial Gate Operator service handles the heavy, high-cycle systems that control vehicle access at businesses, managed communities and shared properties. These units run far more often than a home gate, and their failures are expensive when the entrance is blocked, so they get serviced with an eye on uptime. We work on commercial-grade equipment and understand the difference between a residential operator pushed too hard and a true commercial unit built for the traffic. We test brakes, loops, safety devices and the access layer together, because a commercial entrance is a single system from the credential to the gate leaf. Commercial operator repair in Virginia Beach typically runs $300 to $900 or more depending on the fault and the parts, and the written estimate sets the final number before work starts. We schedule this work carefully rather than promising same-day.
High-Cycle Duty and Brake Wear
Commercial gates live and die by cycle count, and brakes and drives wear faster than anything else on the unit. We measure wear against the traffic the gate actually sees, so a busy entrance gets the attention it needs. The goal is a gate that keeps working through a full day of arrivals.

Safety Devices on Shared Entrances
Loops, beams and safety edges on a commercial entrance protect cars, pedestrians and property, and they have to be tested, not assumed. We verify each device trips and reverses the gate as it should. On a shared entrance, that testing is part of the job, not an add-on.
Brands We Service
We work across a wide range of gate systems, and that matters because every brand wears differently. LiftMaster operators are common on residential driveways, and we know their control boards and receiver quirks well enough to diagnose without swapping parts at random. FAAC and BFT systems show up on heavier gates, and their drives and limits behave in ways worth understanding before you touch them. Ghost Controls and Mighty Mule are the entry-level residential workhorses, and we service them without pushing an upgrade.
Linear on a smaller entry system and DoorKing on a commercial or managed-access property each bring their own programming and relay logic, and we handle both. Our technicians have up to 14 years of experience across these systems, which is why a fault on an unfamiliar brand doesn’t stall the job. Whether you have LiftMaster, FAAC, BFT, Mighty Mule or any other make, we can help, and we’ll tell you straight if the honest answer is repair or replacement.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate reverses without reason. A gate that opens and then closes on its own is usually reporting a safety-device fault it can’t resolve. Until it’s checked, assume the safety system is compromised and keep clear of the path.
- The motor hums but nothing moves. A hum with no travel points to a seized drive, a failed gearbox or a gate binding in its track. Running it further stresses the motor and can turn a drive repair into a motor replacement.
- The gate won’t hold open or won’t latch. Limits that have drifted leave the gate stopping in the wrong place every cycle. It looks minor until the gate is resting against a post it shouldn’t be touching.
- The keypad or remote stops working. Credentials that quit can be a dead keypad, a failed receiver or a wiring fault, and guessing which one wastes money. A proper test at the terminal finds the actual cause.
- Anything involving the operator’s power or wiring. Line voltage at the operator and the wiring back to the house are genuinely dangerous to work on, and we don’t recommend opening those enclosures yourself. If you see scorching, a tripping breaker or loose conduit, stop using the gate and have a trained technician look at it.
Our Process, Step by Step
- 1
You call and we listen. We ask what the gate is doing and how it fails, because a few good questions narrow the fault before anyone arrives. Call (844) 834-3028 and we’ll book the visit for Virginia Beach at the next opening, Sunday through Friday, 7am to 7pm.
- 2
We test the gate and operator together. On arrival we cycle the gate, test the safety devices and measure the motor under load. The gate’s weight and travel tell us a lot about whether the fault is in the operator or the gate itself.
- 3
We trace the fault with the right tools. Multimeters, loop testers and manufacturer diagnostics let us follow the signal from credential to relay to motor. This is where gate-only experience pays off, since there’s no learning curve on the brand.
- 4
You get a written estimate before any work. We explain what failed, what the fix involves and what it costs, and the price is quoted and agreed before anything starts. No surprises on the invoice.
- 5
We repair, re-test and walk you through it. After the fix we run full cycles, confirm safety devices trip and show you what changed. If a part is on order, we tell you exactly what’s coming and when.
How Much Does Electric Gate Repair Cost in Virginia Beach?
Most electric gate repairs in Virginia Beach land between $150 and $650, with the number set by what failed rather than by the gate’s size. A typical sensor or safety-edge repair runs $150 to $300 depending on wiring access and how many devices are involved. Control board and receiver work usually falls in the $180 to $520 range, and motor or drive repairs run $220 to $650 because the parts and labor are heavier. Commercial operator work starts higher, typically $300 to $900 or more, because those units see far more cycles and the parts reflect that.
What moves the price: whether the fault sits in the operator or in the gate’s hardware, whether wiring has to be re-run, and whether the brand’s parts are common or need ordering. Access control work adds another layer, since a keypad or entry system is priced separately from the operator. To avoid overpaying, get a written estimate that names the failed part, and be wary of any diagnosis that jumps to a full operator replacement before the sensors, limits and wiring have been tested. Our estimates are free and itemized, and they include what we’ll test, what we’ll replace and what the final price depends on. The written estimate sets the final price, and the job doesn’t start until you agree to it.
Our Service Area Near Virginia Beach
We cover Virginia Beach and the surrounding communities, including Chesapeake, Norfolk, Portsmouth, Hampton, Poquoson, Carrollton, Bethel Manor, Benns Church and Cape Charles. Response times vary with traffic and how the day is booked, and we’ll tell you the realistic window when you call rather than an optimistic one. If you’re across the water in Portsmouth or Norfolk, our electric gate repair covers those areas, and for work closer to home, our electric gate repair is the place to start. Wherever you are in the region, the estimate is free and the price is agreed before work begins.
Serving Virginia Beach, VA – Our Local Coverage Area
We serve Virginia Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Virginia Beach
Electric gate repair is the diagnosis and fixing of the automated parts of a gate: the operator, motor, control board, sensors, safety edges and access control that make it open and close on its own. It covers the electric and mechanical systems rather than the gate’s decorative finish or the fence around it. Our technicians focus only on gates, so the work stays on the actual fault instead of drifting into general repair. Call (844) 834-3028 for an exact quote; estimates are free.
Most electric gate repairs finish in a single visit, often within an hour or two once the fault is identified. Sensor resets, limit adjustments and keypad programming are quick, while control board or motor replacement takes longer because the unit has to be re-tested under load. If a part has to be ordered, we tell you the timeline before we leave. Call (844) 834-3028 and we’ll give you a realistic window for your gate.
Typical electric gate repair in Virginia Beach runs $150 to $650 depending on what failed, with commercial operator work starting around $300 and going higher. Sensor and safety device repairs sit at the lower end, motor and drive work at the upper end, and access control is priced separately. The free estimate names the failed part and the full cost before any work starts. Call (844) 834-3028 for an exact quote; estimates are free.
Yes, we service LiftMaster equipment along with FAAC, BFT, Mighty Mule and other major gate systems. Our technicians work on the brand that’s already on your property rather than steering you toward a replacement system. If a LiftMaster control board or receiver has failed, we diagnose it at the terminal and tell you whether repair or replacement makes more sense. Call (844) 834-3028 to book a visit.
Same-day service is available depending on how the schedule is booked. We answer 24/7 for the phone line, and we dispatch technicians from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 834-3028 and we’ll tell you what’s available.
We stand behind the work we do and will go over what’s covered on your specific repair when we give you the estimate. Because coverage depends on the part and the repair, we explain it plainly rather than quoting a blanket promise. If something isn’t right after the fix, call us and we’ll look at it. Call (844) 834-3028 with questions.
Clear the area around the gate and the operator so a technician can work safely, and have any remotes or access codes ready to test. Note what the gate does when it fails, since a good description of the symptom speeds up diagnosis. Keep people and vehicles out of the gate’s path while it’s being worked on. Call (844) 834-3028 to book your visit.
Schedule Your Electric Gate Repair Service in Virginia Beach Today
If your gate is stalling, reversing or refusing to open, it’s worth having a gate-only technician look at it. Ashton Gate Repair handles electric gate repair, gate opener repair and the access control around them, from residential driveways to commercial entrances, with a free estimate and a price agreed before work starts. Call (844) 834-3028. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. No-obligation estimate, every time. For related work, see our electric gate repair coverage across the region.
Written by the team at Ashton Gate Repair.