Gate Company in Portsmouth - Fast Local Response, Upfront Pricing

Same-day gate service with the price agreed before we start. Licensed and insured technicians covering repairs, operators and access control across the whole service area.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 834-3028

We answer 24/7

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Company in Portsmouth, VA

If you’re pricing a new gate for a Portsmouth driveway or courtyard, the first thing to know is that this is a river town, and gates here live with water. Portsmouth sits entirely within the tidal Elizabeth River watershed, so a gate built the way you’d build one inland tends to meet the same fate: steel hardware that rusts from the bottom up, wood posts that swell and soften at ground contact, hinges that pull free after a wet winter. We install gates built for that reality, and we work on the ones already there. Our technicians have up to 14 years of experience on residential and commercial gate systems. Call (844) 834-3028 for a free estimate.

Call (844) 834-3028

Why Portsmouth Homes Are Different

The housing stock in Portsmouth runs from centuries-old brick and wood in Olde Towne to pre-war bungalows and foursquares in Cradock and Port Norfolk, then on to mid-century ranches and infill properties out toward the Churchland edges and the 23702 corridor. What that mix produces is a lot of long-standing wood and painted steel gates hung on aging masonry or brick piers. The piers crack and shift, the posts settle, and the hardware toggles loose.

Then there’s the climate. Portsmouth runs humid subtropical with damp winters and hot, sticky summers, and nor’easters and tropical systems push water up the Elizabeth with some regularity. Large parts of the city, including Olde Towne, Port Norfolk, and the Churchland edges, sit in overland-flood and storm-surge prone zones. So a gate here isn’t really fighting hinges. It’s fighting galvanic rust and rot driven by saturated soil and constant humidity cycling. That changes how a gate should be built, anchored, and finished, whether it’s a Mighty Mule driveway opener at a Cradock bungalow or a commercial operator at a managed-access property. Our Ashton Gate Repair team works on the gate you have, not the one we’d prefer to sell.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Main Portsmouth Services

Most Portsmouth property owners call us about two things: a gate that’s failing and a gate that needs to go in fresh. Here’s what each involves.

Gate Repair in Portsmouth

Repair here usually means re-securing hardware to tired, moisture-damaged posts and masonry rather than bolting on a new latch and calling it done. The older homes in Cradock and Port Norfolk commonly have wood gates and fences with original iron hardware rusted into swollen posts, sometimes barely hanging on a single hinge after repeated flood and humidity cycles. We assess the post and pier before the hardware, because a new hinge on a rotten post fails inside a season. We diagnose and repair on-site, whether it’s a Mighty Mule or a Linear system. Read more on our gate repair page.

Gate Repair in Portsmouth

Electric Gate Repair in Portsmouth

Electric gate faults are their own animal: control boards, loop detectors, keypads, safety sensors, and the low-voltage wiring that ties them together. Damp soil and humidity cycling are hard on outdoor wiring and connectors, so we start at the control boundary and trace backward. We handle LiftMaster and FAAC systems alongside the residential-grade operators, and bringing electric gate work in-house means no subcontractor round trip and no split responsibility for a gate that still won’t open. We diagnose and repair on-site. Read more on our electric gate repair page.

Electric Gate Repair in Portsmouth
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 834-3028

Gate Installation in Portsmouth

Gate Installation in Portsmouth

Installing a gate in Portsmouth is a different job from installing one twenty minutes inland. The city sits entirely within the tidal Elizabeth River watershed, and in Olde Towne, Port Norfolk, Cradock, and along the Churchland edges the ground stays saturated and the air stays damp for long stretches. That means galvanized or coated steel, pressure-treated or naturally rot-resistant wood, and footings set to proper depth with drainage in mind, not a gate hung on the assumption that the ground will dry out. When we quote Gate Installation for a Portsmouth property, the durability spec comes before the style spec.

Driveway Gate Installation

Signs you need it

You need a new driveway gate when the existing one is pulling off its posts, the posts themselves are soft at ground contact, or the opening was never sized for a vehicle-wide gate in the first place.

What it costs in Portsmouth

Driveway gate installation in Portsmouth typically runs $2,400 to $6,500 for a single-leaf swing gate and $4,200 to $9,800 for a double-leaf or sliding drive gate, hardware and posts included, with automated operators quoted separately.

How we do it

We measure the opening and confirm post locations and footing depth, set the posts with proper drainage, hang the gate leaves, then mount hardware and align the gate through its full swing or slide before we call it done.

Sliding Gate Installation

Signs you need it

A slide gate makes sense when a swing won’t fit the driveway geometry, when the grade is uneven, or when a long opening needs to clear a vehicle without a wide sweep.

What it costs in Portsmouth

Sliding gate installation in Portsmouth typically runs $4,200 to $9,800 for a single-slide residential gate, with the track and v-groove hardware included and the operator priced on its own.

How we do it

We set the track or cantilever foundation level with the grade and drainage, mount the gate body and rollers, then run the gate across its full travel to check for binding before any operator goes on.

What Gate Installation Costs in Portsmouth

Item Typical range in Portsmouth
Single-leaf swing driveway gate, hardware and posts installed $2,400 – $6,500
Double-leaf or sliding drive gate $4,200 – $9,800
Automated operator, add-on to a new gate $1,100 – $2,900

Do I need a permit to install a gate in Portsmouth?

Most new driveway gates with automation, and any gate tied to a fence line near a property boundary, need a check with the city’s building department, and some Historic District properties add review. Ask before you buy hardware.

Can you install a gate on saturated ground near the Elizabeth?

Yes, and it changes the footing spec. On storm-surge prone lots in Port Norfolk or along the Churchland edges we set deeper, better-drained footings and specify coated steel or rot-resistant wood so the gate holds through flood and humidity cycles.

Brands We Service in Portsmouth

We work on nine major gate brands, including Mighty Mule and Ghost Controls for residential driveways and LiftMaster, FAAC, BFT, Linear, Viking, DoorKing, and Elite for everything from backyard gates to managed-access commercial systems. We don’t stock parts on a truck, so turnaround depends on the diagnosis and the part. See our brands.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Gate Company in Portsmouth, VA

These are typical ranges for Portsmouth jobs. The written estimate sets the final price, and we quote before any work starts.

Service Typical range in Portsmouth
Single-leaf swing driveway gate, hardware and posts installed $2,400 – $6,500
Double-leaf or sliding drive gate $4,200 – $9,800
Sliding gate with track and v-groove hardware $4,200 – $9,800
Automated operator, add-on to a new gate $1,100 – $2,900

Price climbs in Portsmouth for a few clear reasons: a soft or failing post or masonry pier that has to be rebuilt before a gate can hang, a footing that has to go deeper because the lot sits in a surge-prone zone, and a manufacturer lead time on a custom-width gate. Those are quoted item by item, and the price is agreed in writing before work starts.

Neighborhoods We Serve in Portsmouth

We handle gate work across Portsmouth, from the historic blocks of Olde Towne to the older bungalow streets of Cradock and Port Norfolk, and out through the mid-century ranches and infill properties around Churchland and the 23702 corridor. We also cover 23701 and 23708. Fast dispatch, 7am-7pm, Sunday through Friday.

  • Olde Towne
  • Port Norfolk
  • Cradock
  • Churchland
  • 23702 corridor

Service Area – Cities Near Portsmouth

Portsmouth borders Norfolk across the Elizabeth, and our coverage reaches into the surrounding cities too. If you’re just outside the city line, we can usually help. We serve Norfolk, VA, Chesapeake, VA, Benns Church, VA, and Carrollton, VA. Call (844) 834-3028 for a free estimate and we’ll confirm your address is covered.

Serving Portsmouth, VA – Our Local Coverage Area

We serve Portsmouth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Gate Company in Portsmouth

Ready to get started? Free estimates · 1-hour response in Portsmouth
Call (844) 834-3028

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Portsmouth Customers Say

★★★★★ 4.9 from 9+ reviews

"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."

- Malik Nash

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

- Simone Boyd

"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."

- Tracy Miller

How It Works in Portsmouth

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Portsmouth - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Portsmouth. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7