Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Chesapeake
When a driveway gate sticks, drags, or quits after a storm, you need someone who knows Chesapeake ground and Chesapeake weather. We’re gate-only specialists, and our technicians have up to 14 years of experience with the swing and slide systems common on the long driveways and riverfront lots around here. That matters because a gate that binds in this city is often fighting its post, not its motor. Call (844) 834-3028. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Chesapeake Homeowners Call Ashton Gate Repair for Gate Repair
We’re a dedicated gate repair specialist, not a fence company that takes gates on the side. Every tool and every diagnostic we run is built around gate hardware and gate operators, from residential driveway arms to commercial access systems. That focus is why property managers and homeowners around Chesapeake keep our number on file.
We work on the gate you have, not the one we’d prefer to sell. If your system is a Mighty Mule on a backyard swing or a LiftMaster on a gated drive, we diagnose what’s actually failing and repair it on-site where we can. The city’s saturated ground and salt air punish hinges, latches, and operator arms harder than most of Hampton Roads, so we spend real time on the hardware behind the panel, not just the control board.
Expect a clear explanation of what failed and a written price before anything is touched. No surprise invoice after the fact.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wood Gate Repair in Chesapeake
Wood Gate Repair in Chesapeake usually starts with a gate that has swollen, sagged, or pulled loose at the hinge because the humid air and wet ground here keep timber moving all year. The job means checking the hinge post for plumb, correcting sag, replacing rotten pickets or stiles, and re-hanging the leaf so it clears the ground and swings true again. Most wooden driveway and pedestrian gate repairs in this city run $180-$450, with full post reset work running higher. A written estimate sets the final price.
Swelling and Sag at the Hinge Post
Humidity swells wood infill and throws a gate out of alignment, which loads the hinges and the operator. We true the leaf, shim or reset the hinge, and treat the timber so it sheds water instead of holding it.
Rotten Stiles and Pickets
Ground contact and splash-back rot the bottom rails first. We cut out the failed sections and splice in matched stock so the gate keeps its look and its strength.
Driveway Gate Repair in Chesapeake
Driveway Gate Repair in Chesapeake most often comes down to a heavy custom wood or metal leaf that has gone out of plumb on its post. Because so much of the city sits on the Great Dismal Swamp edge or tidal riverfront ground, gate posts are frequently set in soil that heaves and stays saturated, so an automated swing gate that binds within months of installation is often a footing and plumb problem rather than an operator fault. A typical driveway gate repair here runs $250-$700 depending on whether the footing is reset, hardware is replaced, or the operator needs re-binding. We quote it in writing first.
Re-Plumbing and Resetting the Footing
A qualified local pro re-plumbs or resets the hinge post footing, does sag correction at the hinge, then re-binds the operator and confirms the safety photocell still trips. On riverfront and rural lots the fix is as much drainage as it is the gate.
Operator Arm and Rack Binding
When an arm or rack binds partway through travel, the operator is usually reporting a gate problem, not causing one. We trace the bind to the post, hinge, or track before touching a control board.
Trusted Brands We Service in Chesapeake
We service equipment from nine major gate brands, including Mighty Mule, LiftMaster, FAAC, and BFT, along with Linear, Viking, Ghost Controls, DoorKing, and Elite. That spread covers both entry-level residential operators and sophisticated commercial access control, so a backyard driveway gate and a managed-access property get the same confident diagnosis. We don’t claim to stock parts locally; what we bring is the know-how to identify the failed component fast and get the right part ordered without guesswork. You don’t need to switch brands to get good service. Call (844) 834-3028 for a free estimate.
Common Gate Repair Problems We See in Chesapeake Homes
- Posts heaving out of plumb. Saturated ground off the Intracoastal Waterway lifts and shifts footings, so swing gates bind within months of installation. The operator gets blamed; the footing is usually the culprit.
- Fast corrosion on hinges and latches. Salt-laden air off the tidal creeks seizes pivots and strips hardware faster here than in neighboring Hampton Roads cities. Stainless and coated replacements last longer.
- Heat-warped vinyl and swollen wood. Summer heat warps vinyl panels and humidity swells wood infill, throwing gates out of alignment and overloading aged openers that were sized for a lighter leaf.
- Aging pedestrian gates in older neighborhoods. South Norfolk and Indian River mix aging chain-link and wrought-iron walk gates whose hinges and latches have simply worn out and need realignment or replacement.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Chesapeake, VA
Most gate repair in Chesapeake runs $180-$700, priced per job after we look at the gate. A simple hinge, latch, or alignment fix sits at the low end; a post reset, corroded hardware replacement, or operator re-bind pushes toward the top. Electric gate repair involving a control board, keypad, loop detector, or safety sensor typically runs $250-$800. Every figure is a typical estimate, not a fixed rate. The written estimate sets the final price, and we agree it with you before any work starts, so there’s no invoice surprise when the job’s done. Estimates are free.
We Also Serve Cities Near Chesapeake
Our gate repair coverage reaches across Hampton Roads, including Portsmouth, Norfolk, Virginia Beach, and Benns Church. If you manage a property or own a gate just outside Chesapeake, we can still help. Call (844) 834-3028 for a free estimate.
Serving Chesapeake, VA – Our Local Coverage Area
We serve Chesapeake and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Chesapeake
It’s usually the post, not the operator. Chesapeake’s saturated, heaving ground throws hinge posts out of plumb, so the leaf drags and the operator arm or rack binds partway through travel. We check the footing and hinge first, re-plumb what’s moved, then re-test the operator. Call (844) 834-3028 for an exact quote – estimates are free.
Almost every automatic gate has a manual release, and the safe way to use it is to find the release key or lever on the operator housing, disengage the drive per the operator’s manual, and push the gate by hand only after it’s clear of obstruction. Never force a gate that’s still engaged; you can bend the arm or the track. If your release is stuck or corroded from salt air, call us. We answer 24/7.
Because the air here carries salt from the tidal creeks and riverfront, which corrodes hinges, latches, and operator arms faster than in neighboring Hampton Roads cities. The fix is coated or stainless hardware, regular treatment, and prompt replacement once pivots seize. Repairs like this typically run $180-$350. Call (844) 834-3028 for a free estimate.
Yes, a powered gate should have working entrapment protection, such as safety photocells or a sensing edge, and we confirm those trip correctly after any repair. Ask your city about local permit and code requirements for your specific property. Don’t run an automatic gate with failed safety sensors. Call (844) 834-3028.
Summer heat warps vinyl panels, swells wood infill, and stresses an aged operator, so a solar opener that worked fine in cooler months can stall on a heavier or binding leaf. The gate is fighting the hardware, not the sun alone. We diagnose the whole system and quote the fix in writing. Call (844) 834-3028 for a free estimate.
Get Your Chesapeake Gate Working Again
From a wood driveway gate that’s sagged after a storm to an electric operator that needs re-binding, we diagnose the gate you have and repair it on-site where we can. Call (844) 834-3028 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Ashton Gate Repair.