Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Virginia Beach, VA
If you’re putting in a new gate in Virginia Beach, the job starts with what the ground and the weather will do to it. This is a coastal city of 1950s brick ranches near the older beach and Downtown blocks, plus 1980s-to-2000s vinyl-sided and brick-veneer tract homes spreading east and south. Salt air off the ocean and bay eats hinges and fasteners, and sandy soil with a high water table shifts the posts gates hang on. We’re a gate-only specialist working on the gate you have, not the one we’d rather sell. Call (844) 834-3028 for a free written estimate.
Why Virginia Beach Homes Are Different
Gates here fail differently than gates inland. The salt-laden air that comes with living near the Atlantic and the Chesapeake doesn’t just dull the finish; it corrodes hinges, latches, and the fasteners holding panels together, and it works on gate hardware every day of the year. Add frequent nor’easter and hurricane exposure, and every gate has to be re-checked for wind-load anchoring and post integrity after storm season.
The soil matters just as much. Much of Virginia Beach sits on sandy coastal ground with a high water table, and the low-lying areas near the Lynnhaven and Rudee inlets flood and hold water after heavy rain. Posts set in that ground heave, settle, and lean. A gate that sagged over one wet winter usually isn’t a gate with a bad latch; it’s a gate whose posts moved.
The housing stock shapes the work too. A 1960s brick ranch near the older beach areas and a 1990s brick-veneer home out toward the east side both typically have wood or vinyl gates on pressure-treated or metal posts, and both are fighting the same salt air. Oceanfront and bayfront properties run into rust and rot faster than anything a few miles inland.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Virginia Beach Services
Most Virginia Beach homeowners who call us are dealing with one of two things: a gate that’s stopped working, or a gate they want built right the first time.
Gate Repair in Virginia Beach
Repair work here is usually mechanical and structural before it’s anything electronic. After a nor’easter in the Resort Area or the bayfront neighborhoods, the most common call is a rusted or bent hinge and a gate that’s sagged because its posts shifted in saturated, sandy soil, not a broken latch. We check the anchor points, the posts, and the panel before we touch the operator. For driveway and privacy gates on wood or vinyl panels, we look at rot at the hinge line and corrosion on the fasteners. For a closer look at what we handle, see gate repair.

Electric Gate Repair in Virginia Beach
Electric gates in Virginia Beach have two enemies: salt air and storm-driven moisture. Control boards, loop detectors, keypads, and safety sensors don’t like humid coastal conditions, and a board that works fine in dry weather can start faulting once the humidity climbs. We diagnose on-site across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, checking the operator, the wiring, the safety edges, and the power run before recommending anything. You’ll find the detail on electric gate repair.

Gate Installation in Virginia Beach

Gate installation in Virginia Beach has to solve for a climate that most installation guides ignore. Salt air will go after every hinge and fastener on the gate, and the sandy, high-water-table soil under much of the city means the posts decide whether the gate still swings true five years from now. Whether you’re replacing a rusted-out driveway gate on a 1970s ranch or adding an automatic entry gate to a newer brick-veneer home on the south side, the measure, the footing, and the hardware all have to be chosen for this coast, not for a catalog. We handle the full scope, from a single swing gate to a full automated system; you can read more about gate installation if you want the broader picture.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car in the rain, or your existing operator has been repaired enough times that replacing the whole system makes more sense than another fix.
What it costs in Virginia Beach
Automatic gate installation in Virginia Beach typically runs from $3,500 to $9,000, depending on gate size, operator brand, and how much site work the posts and power run require.
How we do it
We measure the opening, confirm the post footings will hold in sandy soil, run and protect the power and low-voltage control wiring, mount the operator and safety edges, and test the full cycle before we leave.
Driveway Gate Installation
Signs you need it
The driveway is open to the street, the old gate has rotted or rusted past repair, or you’re adding a gate where there’s never been one.
What it costs in Virginia Beach
A new driveway gate in Virginia Beach typically costs $2,000 to $6,500 for the gate and hardware, with automation and site work priced separately in the written estimate.
How we do it
We set the posts to proper footing depth in the coastal soil, hang and align the panels, fit hardware rated for salt air, and check the swing or slide through a full cycle before finishing.
What Gate Installation Costs in Virginia Beach
| Item | Typical range in Virginia Beach |
|---|---|
| Driveway gate, gate and hardware | $2,000 – $6,500 |
| Automatic gate installation, complete | $3,500 – $9,000 |
| Electric gate installation, operator and controls | $2,500 – $8,000 |
Can you install a gate that stands up to salt air and storm season?
Yes. We specify hardware and fasteners rated for coastal conditions, set posts to proper footing depth in the sandy soil, and anchor for wind load, so the gate holds through nor’easter season instead of corroding and sagging after a year.
Do you handle the power run and the safety edges on a new automatic gate?
We do. A new automatic gate in Virginia Beach includes the power run, low-voltage control wiring, and safety edges, all tested before we finish. It’s measured and scheduled work, so the estimate comes first and the price is agreed before anything starts.
Brands We Service in Virginia Beach
We work on LiftMaster, FAAC, BFT, Mighty Mule, and the other major gate systems you’re likely to have on a Virginia Beach property, from residential-grade operators to commercial access control. We don’t claim to stock every part; a specialty part gets ordered and we give you a straight timeline. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Virginia Beach, VA
| Service | Typical range in Virginia Beach |
|---|---|
| Gate repair, hinge, latch, or alignment | $150 – $450 |
| Post reset or footing repair | $350 – $1,200 |
| Electric gate repair, board or sensor | $200 – $650 |
| Operator replacement | $800 – $2,500 |
| Driveway gate, gate and hardware | $2,000 – $6,500 |
| Automatic gate installation, complete | $3,500 – $9,000 |
| Electric gate installation, operator and controls | $2,500 – $8,000 |
| Sliding gate installation | $3,000 – $8,500 |
In Virginia Beach, price climbs with the site: a gate needing new footings in saturated sandy soil, a long power run, or commercial-grade access control costs more than a straightforward residential swap. Every figure above is a typical estimate, and the written estimate sets the final price, quoted and agreed before any work starts.
Neighborhoods We Serve in Virginia Beach
We work across Virginia Beach, from the Resort Area and the bayfront blocks to the older beach and Downtown neighborhoods and the newer brick-veneer subdivisions on the south and east sides. Coastal properties near the Lynnhaven and Rudee inlets see the fastest corrosion and post movement, so those calls often need a closer look at the footings. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
- Resort Area
- Downtown and the older beach neighborhoods
- Bayfront communities along the Chesapeake
- South-side and east-side subdivisions
Service Area – Cities Near Virginia Beach
Virginia Beach sits at the heart of Hampton Roads, and we work the surrounding cities too. If you’re just over the line in Norfolk, VA, or south toward Chesapeake, VA, the salt air and sandy soil follow you, and so does the work. Across the water we cover Portsmouth, VA and up the peninsula to Hampton, VA. Same gate-only focus, same written estimate before any work starts, wherever you are in the region.
Serving Virginia Beach, VA – Our Local Coverage Area
We serve Virginia Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Virginia Beach
We answer 24/7 and dispatch technicians with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Repair calls are often handled same-day; installation is measured and scheduled, with a free written estimate first.
Many gate installations need a city permit, and most HOAs require approval before you build. Rules vary by neighborhood, so check with the city’s building department and your HOA before work starts. We can talk through what your project will involve so you know what to ask.
We cover all of Virginia Beach plus Norfolk, Chesapeake, Portsmouth, and Hampton. Whether you’re on the oceanfront, the bayfront, or inland on the south side, the estimate is free and the price is set per job by the written estimate before any work begins.
Call (844) 834-3028 for a free estimate on your Virginia Beach gate project. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts, and our technicians have up to 14 years of experience across residential and commercial gate systems.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Virginia Beach Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Malik Nash"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Simone Boyd"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Tracy Miller