Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Virginia Beach Homeowners
Getting a new gate installed right is mostly about what’s decided before anyone digs: gate type, swing or slide direction, operator capacity, power location, and safety edges. Get one of those wrong and an entry gate becomes a daily problem instead of a daily convenience. Our technicians have up to 14 years of experience, and we handle gate installation across Virginia Beach for homeowners, property managers, and small business owners. We’re a gate-only specialist, so we’re fluent with both residential-grade operators like Mighty Mule and Ghost Controls and commercial systems like FAAC and BFT. We answer 24/7 at (844) 834-3028, and we schedule installations Sunday through Friday, 7am to 7pm. Free estimates, upfront pricing, and a written price agreed before any work starts.

Key Takeaways
- We install automatic, electric, driveway, sliding, and swing gates, plus operators and fabricated gate leaves.
- Gate installation is measured, ordered, and scheduled – not a same-day repair call.
- Every price is quoted and agreed in writing before work begins.
- Ashton Gate Repair is Ashton Gate Repair – a specialist in gates, not a general fence or handyman operation.
Automatic Gate Installation
Automatic Gate Installation means fitting a gate and an operator so the entry opens by remote, keypad, app, or vehicle sensor instead of by hand. You need it when a manual gate has become a chore to open in rain or requires someone to get out of the car, or when a property needs controlled access. We measure the opening, match operator capacity to the weight and length of the leaf, and site the power and controls so they’re reachable and out of harm’s way. Automatic setups typically run $3,200 to $9,500 depending on gate size, operator grade, and how far the power run travels. We schedule each installation in Virginia Beach once parts arrive, and the estimate is free before anything is ordered.
Matching Operator to Gate Weight
An operator sized too small for a heavy leaf will strain, overheat, and fail early. We check weight and length first, then choose a model with headroom to spare. That keeps cycles smooth and stops the constant limit adjustments that come from an undersized unit.
Controls, Keypads, and Remotes
Controls are only as good as where they sit. We place keypads and receivers within reach of the driver’s window and wire them so they don’t sit in standing water or get clipped by the leaf. Remotes and codes get tested before we leave.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation Services cover the whole job from measurement and fabrication through the operator, wiring, and final test, so you don’t have to coordinate a gate company, an electrician, and a fence contractor. You need these when building new entry access, replacing a gate that’s beyond repair, or converting a manual driveway gate to electric. We work on both residential systems like Mighty Mule and commercial-grade operators like FAAC, and we diagnose on-site so decisions get made with the gate in front of us. Full installs typically range from $2,800 to $12,000 depending on leaf size, material, operator, and power distance. Portsmouth and other nearby locations get the same measured, scheduled approach, with no surprise line items.
Residential and Commercial Scope
Backyard driveway gates and managed-access commercial entries are different jobs with different operator demands. We scope each one on its own terms rather than forcing a residential operator onto a busy commercial site. If a property needs access control, that gets designed in from the start.

Permits and Power Coordination
Most cities require a permit for a new automated gate and its electrical connection, so ask your city’s building department what applies to your address. We flag that early so it doesn’t stall the install. Power runs get planned before the gate is hung.

Electric Gate Installation
Electric Gate Installation is the wiring side of the job: running power to the operator, installing loop detectors, safety edges, keypads, and control boards, then tuning the whole system so it opens and closes reliably. You need it whenever a gate has an operator that requires a dedicated circuit, or when converting a manual gate to powered access. Our technicians handle control boards, loop detectors, keypads, and safety sensors directly rather than subcontracting them out, which is where general repair outfits often get stuck. Electric installations typically run $3,500 to $11,000 depending on operator type, sensor count, and the length of the power run. Because wiring is involved, these are scheduled jobs, not same-day calls.
Safety Edges and Loop Detectors
A gate that closes on a car or a person is a serious hazard, and safety edges plus loop detectors are what prevent that. We test each sensor’s reversal behavior rather than assuming it works. If a device fails the test, the install isn’t finished.
Power Runs and Disconnects
Operators need a properly sized circuit and a disconnect within reach, and the wiring has to be protected in conduit where it’s exposed. We plan the run so it isn’t routed through traffic or garden beds that get dug up. The connection point gets agreed with you up front.
Driveway Gate Installation
Driveway Gate Installation means fitting a gate across a residential vehicle entrance, either swing or slide, matched to the driveway width and the way cars actually pull in and out. You need it when building a new driveway entrance, replacing a failing gate, or adding privacy and access control to a wide opening. We measure the actual opening, check which way the ground slopes for a swing gate, and confirm the clearances a vehicle needs to pass without clipping the leaf. Driveway installations typically run $3,000 to $10,500 depending on width, material, and whether the gate is automated. We measure and quote in Virginia Beach at no charge, and the written price is agreed before work starts.
Swing Versus Slide
Swing gates need driveway depth behind the opening; sliding gates need clear track or cantilever room along one side. We look at the layout and recommend the type that actually fits the space. That call happens before anything is ordered.
Clearance and Grade Considerations
A slight slope can swing a gate into the driveway or leave the leaf scraping. A heavy panel that loses its track is a real hazard, so we check grade and travel path carefully. Post footings go to proper depth to hold the load.
Sliding Gate Installation
Sliding Gate Installation is fitting a gate that rolls sideways along a track or cantilever arm rather than swinging into the driveway, which suits openings where there’s no room to swing. You need it when a driveway is tight, a swing gate would block traffic, or the opening is wide enough that a swing leaf would be unwieldy and heavy. We set the track or cantilever foundation true, align the gate carriage so it runs smooth, and fit the operator and stops so the gate halts where it should. Sliding installs typically run $3,800 to $12,000 depending on span, materials, and operator grade. Job details get measured and scheduled, and a full written price gets agreed before work begins.
Track and Cantilever Options
Tracked slides are simpler to install but need the track kept clear of debris. Cantilever gates avoid a ground track but demand a stronger foundation. We recommend based on how the site drains and what gets driven over it.
Keeping the Carriage True
A slide gate that binds will chew through rollers and strain the operator. We check the carriage alignment and the stop points before powering up. That’s often what separates a smooth install from one that fights itself.
Gate Opener Installation
Gate Opener Installation is fitting the operator itself: the motor unit, control board, arm or underground operator, and all the triggers that tell it to open. You need it when adding automation to an existing manual gate, replacing a failed operator, or installing a new one where the gate leaf is already in place. We work with LiftMaster, Mighty Mule, and other brands, and we match the operator to the gate’s weight and cycle count rather than fitting whatever’s on hand. Opener installs typically run $1,400 to $5,500 depending on operator grade, gate type, and control accessories. We schedule this after measuring the gate, and the written price is agreed before any work begins.
Choosing the Right Operator
Residential driveway use and busy commercial entry use call for very different operators. We look at weight, cycles per day, and how the gate travels. Fitting a light-duty unit to a heavy gate is a common and expensive mistake.

Integrating Access Controls
Keypads, receivers, and intercoms have to be wired into the control board and tested together. We check that each trigger opens the gate reliably before handing over. Codes and remotes get set up on the spot.
Gate Fabrication
Gate Fabrication is building a gate leaf to fit a specific opening when an off-the-shelf size won’t work, or when a property needs a custom width, height, or style. You need it when the opening is non-standard, when a matching design is being reproduced, or when a damaged gate needs a fresh leaf in the right dimensions. We design the frame and leaf around the opening and the operator so the finished gate works as a system. Fabricated gate leaves typically run $1,800 to $8,500 depending on material, size, and finish. Fabrication is a scheduled process, and a free measure plus a written price comes before work starts.
Frame and Leaf Construction
A gate that sags is usually under-built for its span. We choose frame sizing to handle the leaf weight and the loads from the operator. That keeps the gate true over time.
Matching an Existing Design
If you’re reproducing a style, we look at the existing gates and rails and build to match. That keeps a new leaf sitting with the rest of the property. Details get confirmed at the measure.
Brands We Service
We work with LiftMaster operators frequently, and we know how their control boards and safety inputs behave, which makes wiring a new install more predictable. We also service Mighty Mule systems, which are common on residential driveway gates, and we know where those units tend to wear and how to size a replacement accurately.
On the commercial side, we work with FAAC and BFT operators on heavier access systems, where cycle count and sensor logic matter more. We’re independent and experienced with these brands rather than tied to one, so whether you have LiftMaster or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate sags or drags. A leaf scraping the ground or leaning in the frame means the hinge or post has moved. Left alone, that turns into a strained operator or a gate that comes off its track, so it should be checked before it fails.
- The operator overheats or trips its breaker. That points to an undersized operator, a binding gate, or a wiring problem. Each needs to be tested in person, and guessing usually makes it worse.
- Safety sensors aren’t reversing the gate. A gate that closes on an obstruction is a crushing hazard, especially on a heavy slide gate. Stop using the automation and have the sensors checked before letting anyone near it.
- Power to the operator keeps cutting out. Flickering or intermittent power usually means a failing connection or undersized circuit. That needs proper testing rather than a reset each time.
- You’re converting a manual gate to electric. Matching an operator to an existing leaf takes measurement and weight checking. Doing it wrong ruins the gate or the operator, so get it measured first.
Our Process, Step by Step
- 1
Free on-site measure and quote. We look at the opening, the ground, the power available, and how the gate will be used, then give you a written price. Nothing gets ordered until you agree.
- 2
Planning the operator, power, and controls. We match the operator to gate weight and use, and plan the power run and the placement of keypads, sensors, and safety edges. Wiring and sensor logic get worked out here, not improvised on install day.
- 3
Ordering and scheduling. Gates and operators are measured, ordered, and scheduled rather than rushed. We confirm lead times and book the install for a slot that works for you.
- 4
Fabrication and install. Custom leaves get built to the measured opening, then posts go to proper footing depth and the carriage or hinges get aligned. Every sensor and control gets tested before we call it done.
- 5
Final walkthrough and test. We run the gate through open, close, and reversal cycles and go over the controls with you. If anything isn’t right, it gets corrected before we leave.
How Much Does Gate Installation Cost in Virginia Beach?
A typical driveway gate installation in Virginia Beach runs $3,000 to $10,500 depending on gate width, material, and whether it’s automated. An electric gate installation runs $3,500 to $11,000 depending on operator grade and sensor count, while a sliding gate installation runs $3,800 to $12,000 depending on span and foundation. Opener installation alone runs $1,400 to $5,500, and custom gate fabrication runs $1,800 to $8,500.
What moves the number: gate size and weight, operator grade (residential like Mighty Mule versus commercial-grade like FAAC), the length of the power run, the number of safety devices, and whether posts need new foundations.
How to avoid overpaying: get the operator sized correctly the first time, plan the power run before the gate is hung, and don’t skip safety edges only to add them later. Cheap now often means paying twice.
Every estimate is free, and the price is quoted and agreed in writing before any work starts. There are no fees added after the fact. Call (844) 834-3028 for an exact quote.
Our Service Area Near Virginia Beach
We schedule gate installations across Virginia Beach and the surrounding area, including Norfolk, Chesapeake, Hampton, Poquoson, Carrollton, Bethel Manor, Cape Charles, and Benns Church. Installations are scheduled around the measure and delivery timeline rather than treated as emergency calls, so we book a slot that fits your project. Repairs in the same area are handled on a faster schedule. Call for a free estimate and we’ll confirm the timing your job needs.
Serving Virginia Beach, VA – Our Local Coverage Area
We serve Virginia Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Virginia Beach
Gate installation is fitting a new gate and, where wanted, its operator, wiring, safety sensors, and access controls. It covers measuring the opening, building or choosing the gate leaf, setting posts to proper depth, and installing the operator and controls. It’s a measured, scheduled job rather than a repair call, and we plan it around your site’s layout and power.
Most installations are scheduled projects, not same-day work, and timing depends on gate type, operator grade, and whether fabrication or power runs are involved. A simple opener install moves faster than a full custom gate with new wiring. We give you a clear timeline in the written estimate so you know what to expect.
Gate installation in Virginia Beach typically runs from $3,000 to $10,500 for a driveway gate and up to $12,000 for larger sliding or electric systems, depending on size, material, operator, and sensors. Opener-only installs run $1,400 to $5,500, and custom fabrication runs $1,800 to $8,500. The written estimate sets the final price. Call (844) 834-3028 for an exact quote – estimates are free.
Yes. We service LiftMaster, FAAC, BFT, and other major gate operators, and we match the operator to your gate rather than pushing a brand switch. Being independent and experienced across brands means we diagnose what’s on your site. Call (844) 834-3028 for a free estimate.
No – installation is measured, ordered, and scheduled, not a same-day repair call. We answer 24/7 at (844) 834-3028. Fast dispatch runs from 7am to 7pm, Sunday through Friday, for repair calls, and installations get booked into a measured slot.
Warranty terms depend on the gate, operator, and manufacturer involved, and we confirm the details in your written estimate rather than implying a blanket guarantee. We stand behind the workmanship and make sure controls and safety devices are tested before we leave. Ask about the specific coverage for your job when we quote.
Clear the work area, confirm where power and controls can be placed, and decide how the gate will be opened (remote, keypad, sensor, or intercom) before the measure. Check with your city’s building department about any permit that applies. Once that’s set, we measure, order, and schedule the install.
Schedule Your Gate Installation Service in Virginia Beach Today
Call (844) 834-3028 to schedule a free gate installation estimate in Virginia Beach. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll measure the opening, match the operator to your gate, and give you a written price you agree to before work starts. No obligation, no surprise line items.
Written by the team at Ashton Gate Repair.