Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Chesapeake, VA
Chesapeake has a gate problem that most of Hampton Roads doesn’t: ground that stays wet. From the Great Dismal Swamp edge down through the tidal creeks off the Intracoastal Waterway, saturated soil and salt-heavy air work on hinges, latches, and operator arms year-round. That shapes every installation we quote here. Long driveways on generous lots usually call for a custom wood or metal swing gate rather than a production model, and getting the posts right the first time matters more than the gate itself. If you’re planning a new automatic driveway gate or replacing one that’s failed, call (844) 834-3028 for a free estimate.
Why Chesapeake Homes Are Different
Start with the water table. In the riverfront communities off the Intracoastal Waterway, gate posts are often set in ground that heaves after a nor’easter. A gate that was perfectly plumb in spring can bind against its opener by fall. We see it on both new gates and older ones that were fine until a storm rolled through.
The housing stock spreads the work across two very different problems. Most of Chesapeake is single-family homes on generous lots with detached garages and long driveways, which means driveway gates tend to be custom wood or metal, sized and hung for that specific opening. Then there are the older neighborhoods in South Norfolk and Indian River, where you’ll find aging chain-link and wrought-iron pedestrian gates that have been swinging on the same hinges for decades. Those need corrosion work and post repair, not a new operator.
The climate does the rest. Chesapeake runs humid subtropical with frequent coastal storms, so wood swells and steel rusts, and summer heat warps vinyl and stresses automatic openers. Salt-laden air along the tidal creeks speeds up hinge and latch corrosion faster than in any neighboring Hampton Roads city. That’s why gate work here is as much about corrosion-proofing and drainage as it is about fixing the gate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Chesapeake Services
These are the two jobs Chesapeake homeowners and property managers call about most often: bringing a failing gate back to working order, and tracking down the electrical fault behind a gate that won’t move.
Gate Repair in Chesapeake
Repair work in Chesapeake usually starts with corrosion. Hinges pit, latches seize, and operator arms wear at the pivot points because of the salt air moving off the tidal creeks. On a custom wood driveway gate, we’re also looking at swollen stiles and sagging frames from a wet season. We assess the whole gate, not just the part that failed, because a hinge that’s about to go is cheaper to catch now. For full details on what our Gate Repair in Chesapeake covers, including the sub-jobs we handle, see that page.

Electric Gate Repair in Chesapeake
Electric faults in Chesapeake often trace back to the ground, not the control board. When a post heaves after a storm, the gate arm binds, the operator strains, and eventually the board faults out. We diagnose the whole system: control boards, loop detectors, keypads, safety sensors, and the mechanical alignment they depend on. For the full scope of our Electric Gate Repair in Chesapeake, including how we isolate board faults from alignment problems, that page has the detail.

Gate Installation in Chesapeake

Gate installation in Chesapeake has to account for soil that moves. A gate set on posts that aren’t deep enough and properly footed for this ground will be out of plumb within a season, and the opener will bind not long after. On the long driveways that dominate the single-family lots here, most homeowners want a custom wood or metal swing gate, sized to the opening and built to handle the humid air. Our Gate Installation work covers residential driveway gates and commercial access systems, measured and quoted before anything is ordered.
Automatic Gate Installation
Signs you need it
You’re adding a gate to a long driveway, or an existing manual gate that someone has to get out of the car to open no longer fits how you use the property.
What it costs in Chesapeake
Automatic gate installation in Chesapeake typically runs $2,500 to $6,500 for a residential driveway gate with an operator, depending on gate material, width, and the power run; the written estimate sets the final price.
How we do it
We measure the opening, set posts to proper footing depth for the soil, hang the gate, mount the operator, run power, and test the safety edges and sensors before we hand it over.
Driveway Gate Installation
Signs you need it
Your driveway entrance has no gate yet, or the gate on it has rusted or warped past the point where repair makes sense.
What it costs in Chesapeake
Driveway gate installation in Chesapeake typically runs $2,500 to $6,500 including the operator, with custom wood or metal gates priced by the measure; the written estimate sets the final price.
How we do it
We measure and quote, order the gate to that opening, set and foot the posts, hang the leaf, then fit and align the operator so the gate swings clean through its full arc.
What Gate Installation Costs in Chesapeake
| Item | Typical range in Chesapeake |
|---|---|
| Automatic gate installation (residential driveway) | $2,500 – $6,500 |
| Driveway gate installation | $2,500 – $6,500 |
| Operator, power run, and safety edges | Included in the above range, priced per job |
Can you install a gate if the ground is wet or uneven?
Yes, but the posts have to be footed deeper and braced to handle it. In Chesapeake’s riverfront areas, we check the ground before quoting so the footing design matches the soil, not a standard template.
How long does a new gate installation take in Chesapeake?
Most residential driveway gates are a single scheduled visit once the gate is built and on site. Custom wood or metal leaves take longer to order, so measure and lead time are set at the free estimate.
Brands We Service in Chesapeake
We work on the gate you have, not the one we prefer to sell. Our technicians are experienced across LiftMaster, FAAC, BFT, Mighty Mule, and other major systems, from residential operators to commercial access control. No brand switch needed to get a diagnosis. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Chesapeake, VA
| Service | Typical range in Chesapeake |
|---|---|
| Automatic gate installation | $2,500 – $6,500 |
| Driveway gate installation | $2,500 – $6,500 |
What pushes the price up in Chesapeake is usually the gate itself: custom wood or metal leaves on long driveways cost more than a stock residential gate, and a power run across a saturated lot needs proper conduit. The price is quoted and agreed before any work starts, so the invoice matches the estimate. Call (844) 834-3028 for a free estimate.
Neighborhoods We Serve in Chesapeake
We install and repair gates across Chesapeake, from the older streets near South Norfolk to the riverfront properties off the Intracoastal Waterway. The list below covers the areas we’re asked about most, but it isn’t a boundary. If you’re not sure whether your address is covered, call and ask.
- South Norfolk
- Indian River
- Great Bridge
- Western Branch
- Deep Creek
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Service Area – Cities Near Chesapeake
The saturated ground and salt air that define Chesapeake gate work don’t stop at the city line. We also serve the surrounding Hampton Roads communities, including Portsmouth, VA, Norfolk, VA, Virginia Beach, VA, and Benns Church, VA. If your gate is in one of these areas, the same footing and corrosion concerns apply, and the quote process is the same.
Serving Chesapeake, VA – Our Local Coverage Area
We serve Chesapeake and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Chesapeake
Yes. We cover Chesapeake from South Norfolk and Indian River out to the rural southern edge, including the riverfront communities off the Intracoastal Waterway. Call (844) 834-3028 to confirm your address and set up a free estimate.
Most cities require a permit for a gate and fence at the property line, so ask your city’s building department. If you’re in an HOA, check their design rules before ordering, since height and material restrictions vary by community.
We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Repair calls are often booked the same day. Installations are measured and scheduled, since the gate is ordered to your opening.
Whether your gate has stopped moving or you’re ready to add one, call Ashton Gate Repair at (844) 834-3028 for a free estimate. We’ll look at the gate, tell you what it needs, and quote it before any work begins.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Chesapeake Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Malik Nash"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Simone Boyd"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Tracy Miller