Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Virginia Beach?
Gate installation in Virginia Beach typically costs $2,800 to $8,500 for a residential driveway gate with a standard automated operator, including materials, site prep and labor. A basic single-leaf swing gate with a light-duty operator runs $2,200 to $4,000, while a full commercial-grade access system with keypad, loop detector and heavy-duty operator climbs to $12,000 or more. The written estimate after we size the opening, check the soil and confirm the operator is what sets your final price.
We work on the gate you have, not the one we prefer to sell, and that principle holds whether the job is a new install or a repair. Our technicians have up to 14 years of experience, and we service every major operator family from Mighty Mule and Ghost Controls on the residential side up to LiftMaster, FAAC, BFT, DoorKing, Linear, Viking and Elite on heavier systems. Call (844) 834-3028 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Gate Installation Cost Breakdown (2026)
Here’s how the numbers stack up for a Virginia Beach gate project. Every line is an estimate range for this market, and the written estimate you receive is what governs the final price.
| Line item | Typical range |
|---|---|
| Gate leaf and frame (single swing, residential) | $1,200 – $3,500 |
| Gate leaf and frame (double swing or sliding) | $2,500 – $6,000 |
| Operator and automation (residential swing/slide) | $800 – $2,800 |
| Commercial-grade operator (FAAC, BFT, DoorKing) | $2,500 – $7,000 |
| Concrete footings and site prep | $400 – $1,200 |
| Electrical run to the gate location | $300 – $1,800 |
| Safety sensors and reversing edges | $200 – $600 |
| Keypad, remote, or loop detector | $150 – $900 |
| Labor and commissioning | $600 – $1,500 |
What pushes a price up: the weight and width of the gate leaf, whether the operator has to be commercial duty, how far the power has to travel, and whether the soil holds footings well or needs extra concrete. What brings it down: reusing an existing gate, a shorter electrical run, and picking a residential operator that genuinely matches the load. Our gate specialists size the operator to the leaf, not the other way around, because an undersized operator on a heavy Virginia Beach gate is the most common cause of premature failure.
What Affects Gate Installation Pricing in Virginia Beach
- Gate style and weight. A light tubular aluminum single swing is the cheapest way into an automated gate. An ornamental iron double swing or a long cantilever slider costs more in materials and in the operator rating needed to move it.
- Operator grade. A residential Mighty Mule or Ghost Controls unit is fine for a typical backyard driveway gate. A property manager who needs managed access, logging or loop-driven operation is looking at DoorKing or a heavy FAAC or BFT operator, and that changes the number significantly.
- Power and site work. Running power to a gate on the far side of a long driveway or an outbuilding adds cost. So do footings that need more concrete because of the soil on the lot.
- Safety equipment. Every automated gate needs reversing protection. Photo eyes, safety edges and a properly placed control box are line items, and they’re not optional on a gate that moves with any speed.
- Access control features. Keypads, vehicle loop detectors and intercoms add to the job. Commercial and small-business owners in Virginia Beach often want a keypad for staff and a loop detector so residents don’t have to reach out the window.
- Permits and HOA rules. Most cities require a permit for gate and fence work near a property line or right-of-way, so ask your city’s building department what applies to your lot. Many Virginia Beach neighborhoods also have HOA setback and height rules that affect placement.
There’s a local wrinkle worth knowing. Virginia Beach sits on a mix of sandy soil and clay-heavy lots, and that soil profile changes how a footing is dug and how much concrete goes in the hole. A gate post set to proper footing depth in soft sandy ground needs a wider base than one on firm clay, and getting that wrong shows up as a sagging gate two seasons later. We look at that before quoting. Our Virginia Beach pages cover the neighborhoods we work in and how jobs differ block to block.
Electric Gate Installation vs. Manual: What’s the Cost Difference?
Automating a gate adds roughly $800 to $2,800 on a residential install, and more if the operator is commercial duty. A manual swing gate with a good frame and no operator is the lower-cost option, but the moment you add a keypad, a remote and reversing sensors, you’re most of the way to an automated setup anyway.
Electric gate work is a core part of what we do, not an add-on. That means we’re fluent with the control boards, loop detectors, keypads and safety sensors that turn a gate into a real access system, and we’re not going to hand you off to a subcontractor the moment the job involves wiring. We diagnose and repair on-site across electric gate repair and the full install side, so a gate owner doesn’t have to find a second company as their needs change.
How Long Does Gate Installation Take?
Most residential gate installs take one day on site once the gate and operator are on hand, with electrical rough-in and footing cure adding time on larger jobs. A straightforward single swing with an operator can be wrapped in a day. A long slider, a double gate with ornamental iron, or a commercial access system with multiple control points usually needs two or three visits spread across a week or more so footings can set before the gate goes on.
What stretches the timeline: waiting on a custom-fabricated gate, a long electrical trench, and inspection scheduling if a permit is required. What keeps it tight: a stock gate and operator, a short power run, and prompt approval from the city if a permit applies. If you already have a gate and want it automated rather than replaced, the visit is usually shorter. We’ll tell you honestly at the estimate which path makes sense.
Repair or Replace: Which Makes Financial Sense?
If the gate frame is sound and the operator is the problem, repair is almost always the cheaper route, and a control board, motor or sensor replacement runs a fraction of a new install. If the gate hardware has rusted through, the posts have shifted, or you’re moving from a residential operator to a commercial access system, replacement costs less over time than patching an undersized setup.
A reasonable rule: when the repair estimate heads toward half the price of new, look hard at new. A few things to weigh:
- Operator age and duty. A residential operator that’s been pushed on a heavy gate is a candidate for replacement, not another repair.
- Frame condition. Surface rust on a steel gate is fine. Structural rust in the rails or stiles is a sign to replace.
- Post movement. A gate that drags because a post has settled is often cheaper to fix than to replace, once the post is re-set to proper footing depth.
- What you need it to do. A backyard gate that just opens is different from a managed-access driveway that logs every entry. If your needs grew, so should the system.
We can work with your insurer if storm or impact damage is part of the picture, but we won’t tell you a replacement is needed when a repair finishes the job. We’re gate-only specialists: every technician, every tool and every part we carry on the visit is built around gates, not split across garage doors and handyman work. That focus is why the repair-versus-replace call comes out clean rather than upselling you into a brand you don’t need.
How Much Does a Commercial Gate System Cost?
A commercial-grade gate install with a heavy-duty operator, loop detectors and managed access typically runs $12,000 to $35,000 or more, depending on gate size, operator brand and the number of control points. That’s the range property managers and small business owners are operating in once a driveway needs to log entries, control a staff lot, or coordinate with a broader access system.
Commercial and high-security operators such as FAAC, BFT and DoorKing sit at the top of that range. On the residential side of the same work, LiftMaster, Linear, Viking, Elite, Ghost Controls and Mighty Mule cover everything from a light backyard gate to a heavier automated driveway. Being able to diagnose and service both entry-level residential operators and sophisticated commercial access control means the same company can handle a backyard driveway gate now and a managed-access property later. Call (844) 834-3028 for a free estimate on either.
How to Save on Gate Installation
The biggest money saver is right-sizing the operator so it isn’t replaced in a few years, and the second is getting the footings correct the first time. Beyond that:
- Automate an existing gate where you can. If your gate frame and posts are solid, adding an operator is far cheaper than a full new install.
- Pick the operator for the job, not the brand. A residential-grade operator on a light single swing saves you real money compared with a commercial unit you don’t need.
- Bundle the sensor and access items into the install. Photo eyes, a keypad and a loop detector are cheaper to add during the initial install than in a separate visit.
- Sort the power run early. Knowing where the power will come from before the gate location is finalized keeps the electrical line item in check.
- Ask about the free estimate. A written estimate before any work starts, sized to your actual gate and lot, is the simplest way to avoid surprises. Call (844) 834-3028, and we’ll book a time. We answer 24/7.
Which Gate Operators Do We Service and Install?
We service and install equipment from nine major gate systems: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. That spans the field from a light backyard Mighty Mule or Ghost Controls operator all the way to a FAAC, BFT or DoorKing commercial access system on a managed property.
That range means we diagnose and repair whatever system is on-site, and we don’t upsell a brand switch to make the job fit our inventory. If your gate is a LiftMaster and a control board is the fault, that’s what gets replaced. If your community is moving to a DoorKing managed-access setup, we can quote and install it. From residential driveway gates to commercial access systems, our technicians have up to 14 years of experience, and they’re used to working on both ends of the range.
What Safety and Permit Rules Apply to an Automated Gate?
An automated gate is a moving machine, and the parts that matter most for safety are the operator’s wiring and power, the weight of the panel, and the travel of a slide gate. Any gate that opens on command needs reversing protection, so photo eyes and safety edges are standard on a proper install, not a luxury. Wiring and power at the operator are genuinely dangerous, and a slide gate that comes off its track can do real harm. This is work for a trained technician, and we’d steer you away from DIY on the operator wiring and any part of the gate that can crush or trap.
On the permit side, most cities require a permit for gate and fence work near a property line or right-of-way, so ask your city’s building department what applies to your lot before the gate goes in. Virginia Beach neighborhoods often carry HOA rules on setbacks, height and where a gate can sit, and confirming those early avoids a re-do. We won’t quote a gate placement that runs into either one.
FAQs – Gate Installation Cost
How much does it cost to install a driveway gate in Virginia Beach?
A driveway gate with an automated operator in Virginia Beach typically costs $2,800 to $8,500 for a residential single swing or slide, and $12,000 or more for a commercial-grade access system. Materials, site prep, the power run and the operator grade drive the range. Call (844) 834-3028 for an exact quote; estimates are free.
Is it cheaper to repair or replace my gate?
Repair is cheaper when the frame and posts are sound and the operator is the fault, while replacement wins when the hardware is rusted through, the posts have shifted, or the job has outgrown a residential operator. As a rule, look at new when the repair estimate approaches half the price of new. Call (844) 834-3028 for a free estimate and a straight answer.
How much does it cost to automate an existing gate?
Adding an operator to an existing gate typically runs $800 to $2,800 on a residential install, plus any access items like a keypad or loop detector. If the gate frame and posts are solid, automation is far cheaper than a full new build. Call (844) 834-3028 for an exact figure.
Do I need a permit to install a gate in Virginia Beach?
Most cities require a permit for gate and fence work near a property line or right-of-way, so ask your city’s building department what applies to your lot. Virginia Beach neighborhoods often have HOA set-back and height rules on top of that. Confirm both before the gate is placed: call (844) 834-3028 if you’re unsure where to start.
Can you install a gate the same day?
Same-day service is available for straightforward jobs, though a full install with footings and electrical rough-in usually takes longer to set properly. We answer 24/7, and we’ll book a time. Call (844) 834-3028 for a free estimate.
Pricing reflects the Virginia Beach market as of 2026. Ashton Gate Repair offers free estimates – call (844) 834-3028.
What Our Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Malik Nash"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Simone Boyd"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Tracy Miller